Issue 11, 2020

A lead-free ferroelectric Bi0.5Na0.5TiO3 based flexible, lightweight nanogenerator for motion monitoring applications

Abstract

The demand for wearable devices has generated intense interest from both industrial scientists and academic researchers. Wearable technology devices must be small, lightweight, and flexible. We propose wearable devices incorporating ferroelectric Bi0.5Na0.5TiO3 nanoparticles (BNT NPs) for motion monitoring and energy harvesting. BNT NPs were prepared using an inexpensive approach, and their fundamental material properties were evaluated by X-ray diffraction analyses, Raman spectroscopy, and scanning electron microscopy. The dielectric, ferroelectric, and piezoelectric properties of our BNT system were characterized: it exhibited a dielectric constant/loss of 325/0.039 at 1 kHz with a depolarization temperature of ∼205 °C. A maximum ferroelectric remnant polarization (Pr) of 34 μC cm−2 at 1 Hz was obtained with a piezoelectric coefficient of 79 pC N−1. Polycaprolactone was used as a matrix to fabricate flexible composite films (PBNT CFs) containing different amounts of BNT NPs. Optimized composites containing 50% BNT based piezoelectric nanogenerators (CPNGs) generated a maximum electrical response of 22 V and 140 nA, and an instantaneous power density of 3.95 mW m−2 in response to an applied mechanical force of 6 N @ 1 m s−2. The PBNT CPNGs were used to charge capacitors and were analyzed in terms of stability, poling, and acceleration-dependent energy harvesting performance. Motion monitoring and energy harvesting in a wearable device were demonstrated while walking, with a heel strike motion yielding 40 V and 220 nA.

Graphical abstract: A lead-free ferroelectric Bi0.5Na0.5TiO3 based flexible, lightweight nanogenerator for motion monitoring applications

Supplementary files

Article information

Article type
Paper
Submitted
02 Jul 2020
Accepted
03 Sep 2020
First published
03 Sep 2020

Sustainable Energy Fuels, 2020,4, 5636-5644

A lead-free ferroelectric Bi0.5Na0.5TiO3 based flexible, lightweight nanogenerator for motion monitoring applications

N. P. Maria Joseph Raj, A. KS, G. Khandelwal, N. R. Alluri and S. Kim, Sustainable Energy Fuels, 2020, 4, 5636 DOI: 10.1039/D0SE00963F

To request permission to reproduce material from this article, please go to the Copyright Clearance Center request page.

If you are an author contributing to an RSC publication, you do not need to request permission provided correct acknowledgement is given.

If you are the author of this article, you do not need to request permission to reproduce figures and diagrams provided correct acknowledgement is given. If you want to reproduce the whole article in a third-party publication (excluding your thesis/dissertation for which permission is not required) please go to the Copyright Clearance Center request page.

Read more about how to correctly acknowledge RSC content.

Social activity

Spotlight

Advertisements